An even smaller 18650 boro mod with both sides of the boro tank exposed. Designed to be as compact as possible without sacrificing the bodies strength so it will last. It has a wide open boro design to show off your boro tank. Using the same silver plated boro contacts as the DNA100c mod for a solid boro connection. The 18650 battery cell is housed in a ModMaker stainless steel tube again with silver pin contact. The mod gets its power thru a Click-Fet chip which allows for a full unregulated mod feel while still having some safety features. Wired in a halo LED fire button which gives the chips feedback thru flashing the led. The body is 3D printed out of PETG material giving you a high temp food grade material that is safe to clean with alcohol. Is made out of a one piece design with a small door on the bottom to wire everything, this design makes the body extra strong.
Enter
Timothy M
Click-Fet Chip Specifications: - Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ) - Operational voltage: 3.1 ± 0.1V - 4.20v - Low voltage protection: 3.1 ± 0.1V - Reverse polarity protection: Yes. Mod will auto fire but board will not burn out. - Idle current: <10uA - Timeout Protection: Yes - Amp Limit: 46.67A (4.2v @ 0.09Ω) Functions and LED Information - Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection. - On/Off Function: When off, 5 clicks turns on and LED's flash 5 times. When on, 5 clicks turns off and LED's flash 5 times. - Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet. - Time Out Protection: If the mod is fired for 10 ± 1s the LED's will flash 8 times and will stop powering the mosfet. - Reverse Polarity Protection. If the battery is around the wrong way the mod will auto fire. - In Use: When powering the mosfet the LED will be on.